Cross Stitch Aida Calculator

Each swatch is one inch of Aida, magnified. Tap a swatch to pick that count.
Finished size–
Aida to cut–
Strands–
Needle–
Stitches per cm–

How Cross Stitch Aida Calculator Works?

The cross stitch Aida calculator works by sizing the design on all 6 Aida counts at once: 11, 14, 16, 18, 20 and 22-count. A 120 × 90 stitch design measures 10.91 × 8.18 in (27.7 × 20.8 cm) on 11-count and 5.45 × 4.09 in (13.9 × 10.4 cm) on 22-count Aida.

You enter

  • Width in stitches
  • Height in stitches
  • Aida count
  • Margin each side
  • Inches or cm

You get

  • Finished size8.57 × 6.43 in
  • Aida to cut14.57 × 12.43 in
  • Strands2
  • NeedleSize 24
  • Stitches per cm5.51
Results for the default 120 × 90 stitch design on 14-count Aida with 3 in margins.

5 Steps the Cross Stitch Aida Calculator Follows

  1. Take the stitch count. The calculator reads the design width and height in stitches.
  2. Size every count. Stitches ÷ Aida count runs for 11, 14, 16, 18, 20 and 22-count Aida and fills the 6 swatches.
  3. Cut the selected count. The selected Aida count gets the design size plus the margin on every side.
  4. Pick the strands. The calculator sets 3 strands for 11-count, 2 strands for 14 to 18-count and 1 strand for 20 and 22-count Aida.
  5. Pick the needle. Tapestry needle sizes go from 22 for 11-count to 26 or 28 for 22-count Aida.

Cross Stitch Aida Calculator Formula

The cross stitch Aida formula is finished size = stitches ÷ Aida count. Aida is always stitched over 1 block, so the Aida count equals the stitches per inch.

Finished sizestitches ÷ Aida count
Aida to cutfinished size + 2 × margin
Stitches per cmAida count ÷ 2.54
Aida count
Blocks (holes) per inch: 11, 14, 16, 18, 20 or 22
margin
Spare Aida on each side, 3 in (7.6 cm) by default

Worked example: 120 × 90 stitches on 14-count Aida

  1. Finished size120 ÷ 14, 90 ÷ 148.57 × 6.43 in
  2. Aida to cut8.57 + 6, 6.43 + 614.57 × 12.43 in
  3. Stitches per cm14 ÷ 2.545.51 per cm
  4. On 18-count120 ÷ 18, 90 ÷ 186.67 × 5.00 in

How to Use the Cross Stitch Aida Calculator

  1. Type your pattern's stitch width and height.
  2. Pick an Aida count, or tap a swatch. Each swatch shows one magnified inch of that count with a small stitched heart, so you can see how fine the stitches get.
  3. Read the finished size and the amount of Aida to cut, including margins.

What Aida Count Means

Aida is woven in blocks with a hole at each corner. The count is how many blocks, and so how many cross stitches, fit in one inch. Higher counts give smaller, finer stitches and a smaller finished piece.

finished size = stitches ÷ Aida count

Aida Count, Strands and Needles

AidaStitch sizeStrandsTapestry needle
11-count2.31 mm322
14-count1.81 mm224
16-count1.59 mm224 or 26
18-count1.41 mm226
20-count1.27 mm126 or 28
22-count1.15 mm126 or 28

Strand and needle sizes are the usual starting points. Many stitchers use 2 strands on 18-count for fuller coverage and 1 on 18-count for a lighter look.

Cross Stitch Aida Calculator FAQ

What Does 14 Count Aida Mean?

14-count Aida means 14 blocks, and 14 cross stitches, per inch of fabric. 14-count Aida holds 5.5 stitches per centimetre and 196 stitches per square inch.

Which Aida Count Is Best?

14-count Aida is the best all-round count for most patterns and beginners. 16 and 18-count Aida give finer detail and smaller designs, and 11-count Aida suits children and stitchers who want larger holes.

How Many Strands Do I Use on Aida?

Use 2 strands on 14, 16 and 18-count Aida, 3 strands on 11-count Aida and 1 strand on 20 and 22-count Aida.

What Needle Size Is Best for 14 Count Aida?

A size 24 tapestry needle is best for 14-count Aida. Use a size 22 needle for 11-count, a size 26 needle for 18-count and a size 26 or 28 needle for 22-count Aida.

Does Higher Aida Count Make the Design Smaller?

Yes, a higher Aida count makes the design smaller. A 120-stitch-wide design is 8.57 in (21.8 cm) on 14-count and 6.67 in (16.9 cm) on 18-count Aida.