How Cross Stitch Fabric Calculator Works?
The cross stitch fabric calculator works by dividing the stitch count by the fabric count, then adding a margin to every side. A 120 × 90 stitch design on 14-count Aida with 3 in (7.6 cm) margins needs a 14.57 × 12.43 in (37.0 × 31.6 cm) piece of fabric.
You enter
- Width in stitches
- Height in stitches
- Fabric type and count
- Margin each side
- Inches or cm
You get
- Fabric to cut14.57 × 12.43 in
- Finished design8.57 × 6.43 in
- Piece to buyMedium pre-cut
- Fabric area181.1 sq in
- Stitches per inch14
5 Steps the Cross Stitch Fabric Calculator Follows
- Read the stitch count. The calculator takes the design width and height in stitches from the pattern.
- Find the effective count. Aida uses the fabric count as stitches per inch. Evenweave and linen stitched over 2 threads use half the fabric count.
- Size the design. Stitches ÷ effective count gives the finished design size in inches, and × 2.54 gives centimetres.
- Add the margins. The margin is added to the left, right, top and bottom, so the fabric grows by 2 margins in each direction.
- Match a pre-cut piece. The calculator checks 5 common cuts (12 × 18 in, 15 × 18 in, fat quarter, half yard and 1 yard) in both orientations and picks the smallest that fits.
The cutting mat on the calculator is drawn to scale, with a 1 in (2.54 cm) grid, so the fabric piece shows its true proportions.
Cross Stitch Fabric Calculator Formula
The cross stitch fabric formula is fabric size = (stitches ÷ effective count) + 2 × margin. The formula runs once for the width and once for the height.
count ÷ threads stitched overwidth stitches ÷ effective countdesign width + 2 × margindesign height + 2 × margin- count
- Holes or threads per inch of the fabric
- threads stitched over
- 1 for Aida, 2 for most evenweave and linen
- margin
- Spare fabric on each side, 3 in (7.6 cm) for framing
Worked example: 120 × 90 stitches on 14-count Aida, 3 in margins
- Design width
120 ÷ 148.57 in - Design height
90 ÷ 146.43 in - Fabric width
8.57 + 2 × 314.57 in (37.0 cm) - Fabric height
6.43 + 2 × 312.43 in (31.6 cm) - Smallest piece
14.57 × 12.43 fits 15 × 18Medium pre-cut
Round the fabric size up to the nearest 1/4 in (5 mm) when cutting, so the margins never come out short.
How to Use the Cross Stitch Fabric Calculator
- Enter your pattern's width and height in stitches. You'll find them on the pattern cover or key.
- Choose Aida, evenweave or linen and the fabric count. For evenweave and linen, choose whether you stitch over one or two threads.
- Set the margin you want on every side. The cutting mat shows the piece to cut, the cut line and the smallest standard piece it fits in.
How Much Margin Should I Leave?
Leave 3 inches (about 7.5 cm) on every side if the piece will be framed or mounted. That's enough to stretch it over a board and hold it in a hoop. Small ornaments and cards can get by with 1.5–2 inches. Large pieces destined for professional framing often get 4 inches.
Which Pre-Cut Piece Should I Buy?
The calculator checks your cut size against common pre-cut sizes and picks the smallest one that fits, in either direction. If nothing fits, buy fabric by length from the roll.
Cross Stitch Fabric Calculator FAQ
How Much Fabric Do I Need for Cross Stitch?
You need the finished design size plus 3 in (7.6 cm) on every side. A 120 × 90 stitch design on 14-count Aida is 8.57 × 6.43 in, so the fabric piece is 14.57 × 12.43 in (37.0 × 31.6 cm).
How Do You Calculate Cross Stitch Fabric Size?
To calculate cross stitch fabric size, divide the stitch count by the fabric count and add 2 margins. Width ÷ count + 2 × margin gives the fabric width, and height ÷ count + 2 × margin gives the fabric height.
Is a Fat Quarter Enough for Cross Stitch?
Yes, a fat quarter (18 × 21 in, 46 × 53 cm) is enough for designs up to 168 × 210 stitches on 14-count Aida with 3 in (7.6 cm) margins. Larger designs need a half-yard or 1-yard cut.
Does Evenweave Need More Fabric Than Aida?
No, 28-count evenweave stitched over 2 threads needs the same amount of fabric as 14-count Aida. Both fabrics give 14 stitches per inch (5.5 per cm), so the design and fabric sizes match.
What Margin Does the Fabric Calculator Use?
The fabric calculator uses a 3 in (7.6 cm) margin by default. Set 1–2 in (2.5–5 cm) for cards and ornaments and 4 in (10 cm) for professional framing.